About vinoth govindha samy

  • Viewed 12

Education

  • 2007 - 2010
    Anna University

    Bachelor of Engineering

    Electronics and Instrumentation Engineering (E&I) under the faculty of Electrical Engineering in First class with aggregate 69%.

  • 2004 - 2007
    Jaya Polytechnic

    Diploma in Engineering

    Electronics and Communication Engineering (ECE) under the faculty of Information & Communication Engineering in First class with Honors with aggregate 82.71%.

Experience

  • 2017 - 2021
    King Abdulaziz City for Science and Technology (KACST)

    Testing & Calibration Expert

    Solar PV Module Testing Facility: • Testing the PV modules according to IEC 61730& UL 61730 for safety, IEC 61215 and IEC 61646 for performance requirements on crystalline silicon terrestrial Photovoltaic (PV) modules. • Calibration and verification of Reference Instruments used for Testing Activities, developed procedures and Uncertainty estimation for calibration, PV Testing as per standard revisions. • Accurately measuring the performance of PV-modules under different environmental conditions (STC, NMOT, Temp Co-eff etc.) • Electrical and Mechanical testing of the PV Module (Electrical safety, Insulation, Ground continuity, Impulse Voltage, Wet leakage, Bypass Diode, Load test, Hail impact, Breakage test etc. • Specialization in “Sun Simulator Calibration” and Thermal Mapping (such as damp-heat, thermal cycling, and humidity-freeze). • Supports in PV-In-Plant Projects and Onsite Activities. Air Conditioning (AC) Testing Facility: • Testing and rating for performance of Non-ducted air conditioners according to ISO 5151:2017. • Test Method: Indoor Air Enthalpy (Min/Max Cooling & Heating, Freeze-up drip, Air Blockage, Condensate Control, Automatic defrost, etc.. )

  • 2014 - 2017
    Tii Techno Testing and Services Pvt.Ltd

    Assistant Manager (Calibration Division)

    • Managing Laboratory for effective job execution related to Certification & calibration. • Assists Engineers in formulating test, calibration, repair, and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments. • Approving and issuing of testing/calibration certificates as Authorized signatories. • Handling a yearly NABL audit, Surveillance audit and Internal Audits as per NABL Standard. • Organizing with Quality Manager for any Revisions, Specifications, Corrective and preventive actions, SOP’s related to Calibration and Testing as per ISO/IEC 17025 Clauses. • To enhance the scope of operations and develop new facilities & Interacted with automotive industries, Plants, Laboratories and receives Testing and calibration work order. • Coordinate and investigate with Customers for calibration work.

  • 2013 - 2014
    National Hub for Healthcare Instrumentation Development (NHHID)

    Project Associate (Technical)

    • Associate with Coordinators, Project Investigator & Scientist for NHHID calibration project related work. • Conducted marketing research more than 100 hospitals about “Medical Equipment Calibration” and “Field Validation” collect information from Doctors, Bio medical Engineers. • Created awareness of the medical equipment and its importance as well as to provide free calibration services to the hospitals. • Based on the survey Established the Laboratory as per ISO/IEC 17025 & ISO/IEC 15189 Standard requirements & developed the Testing and calibration Procedures, Quality Manuals (Level I, II, and III) Documents for Accreditation. • Responsible for Procurement of Reference medical Equipment, Implement and monitor effective procurement schedules along with finalizing the technical specification of the equipment. • Draft the application letter, documents for Vice Chancellor, Registrar and Co-coordinators for Approval and Admin activates, organize the internal/Committee meetings, stock maintenance and Purchasing procedures for Procuring Equipment as per University norm (TN).

  • 2012 - 2013
    Council of Scientific & Industrial Research (CSIR) - CSIO

    Graduate Apprentice (Calibration and Research & Development)

    • During this period, I have experienced in Testing & calibration activity, on-site work and development work. • Operational knowledge of an calibrators, oscilloscope, multimeter, in electrical, Dead weight tester, Transmitters, Gauges in pressure, RTD, Thermocouple, RH sensor, Oven furnace in Thermal. Weights, Balance and measurement dimensional equipment. • Soldering, use of crimping tools, wire stripping, DC & AC Circuits, continuity testing, pinning out connectors, routing and tie wrapping cables. • I have exposed to the development of Instrumentation systems using 8051 based cores and development tools like KEIL/RIDE and PCB designing software Like PROTEUS, ALTIUM.

  • 2010 - 2012
    Dott.Ing.Scandura Calibration & Instrumentation

    Service & Production Engineer

    • Participate in all operational aspects of the instrument field support. This will include pre- and post-sales support, installation, customer training, instrument preventive maintenance, repair and service support. Effectively identify problems as they occur and take appropriate steps to solve them. • Remotely assist customers, from simple requests for documentation to detailed instrumentation troubleshooting. Customers like IOCL, HPCL, GAIL, RIL, CPCL, HAL and BHEL - All over India. • Provide training technicians and engineers who use the equipment on proper care, handling setup and use & Travel to customer sites occasionally required. • Attend the bid opening and prepare the Quotations, Solved the customers clarification technically and commercially through appropriate communication. • Manage parts stocking and availability at the point of service to ensure availability of parts required to minimize customer downtime.

Languages

English
Proficient

Portfolio

Skills